STANDALONE CONSULTANCY SERVICE
CNC and Tooling
Improve how your parts are machined. I help manufacturing teams choose tooling, refine CNC setups and develop machining methods that operators can repeat confidently.
Enquire about CNC and tooling supportWhen CNC and tooling support helps
Bring a new component, an existing machining problem or a process your team wants to improve.
- Tool marks, breakout or inconsistent finishes are causing rework.
- Setups take too long or machining results vary between operators.
- You need to select tooling, plan how to hold a part or prove a new machining sequence.
How the support works
- 01 / REVIEW THE APPLICATION
Start with the part and machine.
We’ll review the component, material, available tooling and how the job is currently programmed and set up.
- 02 / REFINE THE METHOD
Work through the cut.
I’ll help review cutter selection, workholding and the order of operations, then agree what to trial and how to judge the result.
- 03 / HAND OVER THE PROCESS
Make the setup repeatable.
Depending on the brief, you’ll get tooling recommendations, setup guidance or practical training for operators on 3-, 4- or 5-axis CNC equipment.
Preparing a job for the shop floor? Explore Production Readiness and Quality Controls.
Discuss your CNC projectFICTIONAL EXAMPLE / JOB J-204
Sample CNC setup sheet
Batch of 12 cabinet shelves in 18 mm oak-faced board. Use drawing SH-204, Rev B, and confirm that the CNC programme matches that revision.
- 01 / TOOLING
Match the tools to the board
Use a compression router cutter for the profile to help keep both faces clean. Select the drill diameter and depth from the fixing-hole detail on Rev B.
- 02 / WORKHOLDING AND ORIENTATION
Locate the blank from the front edge
Place the finished face up and align the marked front edge with the programme datum. Use the vacuum bed and confirm the blank is secure before machining.
- 03 / MACHINING SEQUENCE
Drill before cutting the profile
Drill the fixing holes while the blank has full support. Cut the profile, then remove and identify the first shelf for inspection before running the rest of the batch.
- 04 / FIRST-OFF CHECKS
Check and record the first shelf
Measure length, depth and fixing-hole positions against Rev B. Check the finished face and edges for damage. Record the results for production lead sign-off before releasing the batch.
Tell me what you’d like to improve
Tell me what you’re machining, which equipment you use and what you’d like to improve.