GL Consulting Solutions

STANDALONE CONSULTANCY SERVICE

Production Readiness and Quality Controls

Get new or changed products ready for production. I help manufacturing teams agree what needs to be checked, prove the first run and give operators clear instructions for repeat work.

Enquire about production readiness

When production readiness support helps

Bring a new product, a change to an existing process or a recurring quality issue on the shop floor.

How the support works

  1. 01 / REVIEW THE REQUIREMENTS

    Agree what good looks like.

    We’ll review the drawings, specifications and production method. Together we’ll identify the dimensions, finishes and assembly details that need checking.

  2. 02 / PROVE THE FIRST RUN

    Check the first part.

    I’ll help plan a trial or first-off inspection, agree who signs it off and define what to do if a part falls outside the agreed requirements.

  3. 03 / HAND OVER THE CONTROLS

    Give operators clear checks.

    Depending on the brief, you’ll get a first-off checklist, an inspection plan or a production handover pack that shows what to check, when to check it and where to record the result.

Read the illustrative manufacturing case study

Discuss your production requirements

FICTIONAL EXAMPLE / JOB J-204

Sample production handover pack

A shop-floor handover for a fictional batch of 12 cabinet shelves. The pack tells the operator which drawing to use, what to check on the first part and who can release the batch.

  1. 01 / DRAWING REVISION

    Use drawing SH-204, Rev B

    Rev B moves the fixing holes 5 mm inboard. The production lead confirms that the drawing in the job pack and the CNC programme both match Rev B before setup.

  2. 02 / SETUP NOTES

    Confirm the material and orientation

    Use 18 mm oak-faced board. Identify the finished face and front edge, and check the CNC programme orientation against the drawing before making the first shelf.

  3. 03 / FIRST-OFF CHECKS

    Measure the first shelf

    Check length, depth and fixing-hole positions against Rev B. Inspect the finished face and edges for damage. Record the measured values and pass or fail against each check.

  4. 04 / SIGN-OFF

    Release the batch after review

    The operator initials the first-off record. The production lead reviews it and records their name, the date and the release decision. If a check fails, hold the batch, correct the setup and check a new first-off part before release.

View the CNC setup sheet for this job

Discuss your production workflow

Tell me what you’d like to improve

Tell me what you’re preparing to make or where quality problems are showing up.

Also interested in (optional)

Choose as many additional services as you like.

Please leave out confidential customer information and passwords.